DJI Phantom 3 Professional Quadcopter with 4K Camera
Quick OverviewDJI Phantom 3 Professional Quadcopter with 4K Camera and 3-Axis Gimbal You can turn on the Phantom 3 motor with just one tap of DJI Pilot app and will set it to default set height. It will then stay completely motionless until you direct it...
DJI Phantom 3 Professional Quadcopter with 4K Camera and 3-Axis Gimbal
You can turn on the Phantom 3 motor with just one tap of DJI Pilot app and will set it to default set height. It will then stay completely motionless until you direct it to the place to go.
If the battery starts to run low quadcopter loses the signal from the controller for any reason, a feature of “return to home” will initialize. The aircraft will then reach to 60ft then make a straight-line course back to home position. As soon he reaches there, it will safely land on the ground and then power itself off.
Intelligent Orientation Control (IOC)
IOC is well designed to make flying more intuitional. Yaw control is allowing quadcopter to continuously rotate, but it has a drawback as you might be confused and get off track of which is “front”. As your controls getting mixed the up, pressing right causing the craft to move forward and by pressing left you can move it backward. IOC helps to prevent this happening as it keeps the tail of quadcopter always pointed towards the pilot.
On-Board 4K Camera
Up to 4K Video and 12MP Stills
The included camera can take JPEG images and also DNG RAW photos at 12MP. It also can record video up to (4096*2160) in H.264. The camera is mounted on 3-axis gimbal which provides proper stabilization and also gives tilt and pan control. Internal MicroSD card records all the media.
Video Resolutions and Frame Rates
DCI 4K (4096 x 2160): 24p, 25p
UHD 4K (3840 x 2160): 24p, 25p, 30p
1080p (1920 x 1080): 24p, 25p, 30p, 48p, 50p, 60p
720p (1280 x 720): 24p, 25p, 30p, 48p, 50p, 60p
94 Degree Wide Angle Lens
The lens is featuring in f/2.8 aperture and is consists of 9 elements which includes an a spherical element. Having 94 degree wide angle view of lens, which is way narrower angle than fisheye for less distortion. But it is still wide enough to enable capturing for establishing shots.
Integrated 3-Axis Gimbal
The gimbal provides enough stability which counteracting the unusual motion such as vibration and wind buffeting and keeps the horizon level even to quadcopter banks. You can also manually control the camera positions by manually tilting and panning the camera by the control dials on the transmitter.
DJI Pilot APP for Android and IOS
Camera Control and Live 720p Monitoring
You can easily view a 720p image with free Pilot mobile for IOS or Android IOS mobile device. The device also enables full camera control which lets you set camera parameters such as camera tilt, shutter speed, ISO, white balance as well as set video shop/start and take photos. The mobile device is connected to the transmitter via USB. Its wireless range is up to 1.2 miles.
In-App Editing and Upload
With the internet connection, you can stream lie to YouTube. Also once recorded video and photos can also be directly downloaded to the phone, it allows it to be edited the complete video with text, music, and you can even share it on facebook, instagram, and other social media networks while your quadcopter is still in the air.
This innovative app is just not for flying. With flight simulator, you can get some pre-ski practice. With flight log, you can review all of your previous flights, duration, time and even look at photos and videos you took while flying.
Handheld Transmitter (Radio Controller) Included
With some dedicated buttons, control sticks and 1.2 miles of range, the customizable Phantom 3 remote controller has been specifically designed to put more controls in the device. Some of its functionality includes:
• Power on/off
• Take photos
• Start/stop recording video
• Gimbal control dial
• Camera settings dial
• Sensitive control sticks
• Flight mode switch
• Return Home button
• USB output
• Customizable buttons
• Mobile device holder
• Power indicators
• Slip-free rubber matte
Integrated Lightbridge Ground Station Support
You can control a lie video feed(FPV) also telemetry overlay (OSD) and much more are rolled into one app-based solution. You can make it work by simply mounting an android mobile device or IOS device on the transmitter which includes a simple mobile device holder which connects via USB. Communication between Phantom 3 and the app is facilitated.
By tethering an android and IOS smartphone for lie FPV monitoring and camera operation which is provided by a type A female USB connector. With the help of mobile device holder, you can easily mount your device directly with the transmitter. In landscape orientation, it facilitates both tablets and smartphones.
It has a 6000mAh LiPo battery which provides power to the transmitter. AC charger is used to charge the battery while it is in the transmitter. Four LED’s on the front of the transmitter indicates the battery status and charging life of the battery.
Intelligent Flight Battery
The flight battery fits into the tail of Phantom 3 and it includes features and also on/off switch with additional four LED charge indicators which are easily visible even during flight. You can also simply plug into the wall outlet with the help of provided power cord and then you are easily good to go. Power regulation and other battery included matters are handled internally by the battery itself.
CFD or computational fluid dynamics have been applied to the proper design, which provides them with increased thrust and provides better efficiency as compared to previous props. This self-tightening design helps to ensure that they will not loose in flight and do not require a separate prop net.