Wireless Remote For Canon/Nikon

Wireless Remote For Canon/Nikon

Availability: Delivered in 2-3 Days
Rs.800
Reward Points: 50
Brand:Yongnuo
Product Code: RC-6/ML-L3

Quick Overview

For Use with Canon EOS.The Canon RC-6 Wireless Remote Control is a simple, compact, infrared remote control that makes it possible to fire a camera wirelessly from as far as 16' (4.8 m). The RC-6 will operate in either 2-second delay mode or will ins...

Available Options

+

For Use with Canon EOS.

The Canon RC-6 Wireless Remote Control is a simple, compact, infrared remote control that makes it possible to fire a camera wirelessly from as far as 16' (4.8 m). The RC-6 will operate in either 2-second delay mode or will instantly take a shot. The RC-6 is only 2.5" (63.5 mm) tall and can fit easily into your pocket or on a keychain.

  • Allows for shutter release up to 16' (4.8 m)
  • Wireless camera operation
  • Runs on one CR2032 lithium button battery (included)
  • May be used to activate mirror-lock and bulb-shutter functions

Compatibility For Canon
    The RC-6 will work with the following Canon cameras

  • EOS 6D
  • EOS 5D Mark II
  • EOS 5D Mark III
  • EOS 7D
  • EOS 60D
  • EOS 60DA
  • EOS 70D
  • EOS 550D
  • EOS 600D
  • EOS 650D
  • EOS 700D
  • EOS Digital Rebel
  • EOS Digital Rebel XT
  • EOS Digital Rebel XTi
  • EOS Rebel Ti
  • EOS Rebel T1i
  • EOS Rebel T2
  • EOS Rebel T2i
  • EOS Rebel T3i
  • EOS Rebel Ti
  • EOS Rebel T4i
  • EOS Rebel T5i
  • EOS Rebel XSi
  • EOS Rebel SL1
  • Limited Edition Digital Rebel
  • Sure Shot 130u
  • Sure Shot 130u II
  • Sure Shot Z115
  • Sure Shot Z135
  • Sure Shot Z155
  • Sure Shot Z180u
  • Sure Shot Z90W
  • EOS-M Mirrorless Digital Camera

Video Function Compatibility
The RC-6 can initiate the video function on Canon DSLR cameras, such as the 70D, 5D series and Rebel series, however it is advisable to check your camera's instruction manual to be certain that remote video recording with the RC-6 is supported by your camera.

Compatibility For Nikon

The Nikon ML-L3 Wireless Remote Control (Infrared) is for use with the following Nikon cameras: D40, D40X, D50, D60, D70, D70S, D80, D90, D600, D3000, D5000, D3200, D5100, D7000, Coolpix P6000, P7000, P7100, N65, N75, Coolpix 8400, 8800, Pronea S, Nuvis S & Lite Touch Zoom Cameras, Nikon 1 J1, Nikon 1 J2 and Nikon 1 V1. It acts as a wireless shutter release capable of instantly triggering the shutter without disturbing the camera, up to a distance of approximately 16' (4.87 m) in front of the camera. The remote can work from behind the camera as well, however its range is not as long. It is recommended for taking pictures of subjects that are difficult to approach, or to minimize vibration for close-ups and time exposure, and it is powered by a CR-2025 3v battery (included). The ML-L3 supports the bulb exposure camera setting making it a worthwhile accessory for shooting long time exposures for low-light photography or unusual daylight effects.

    The ML-L3 supports the bulb exposure camera setting making it a worthwhile accessory for shooting long time exposures during low-light photography sessions, or for unusual daylight effects.

    When the ML-L3 remote control is used in M mode, users can select '- -' as the shutter speed. At this setting, the shutter opens when the shutter-release button on the ML-L3 remote control is pressed (2 seconds after the button is pressed in delayed remote mode) and remains open until the remote-control shutter-release button is pressed a second time (maximum exposure time is 30 minutes). Nikon recommends using a fully-charged EN-EL3 battery or an optional EH-5 AC adapter when using long exposures. For information regarding using the ML-L3 with flash please see the camera's user manual. Basically, depress the timer 3x to get it ready, press to start the shot and step away. Come back and press the button again and it stops the shot.

Write a review

Please login or register to review