Wondlan LE401-WF Wireless Follow Focus with Steadycam
Quick OverviewPRODUCT HIGHLIGHTS:Standard layout:Load Capacity 1kg to 7kg 1x Load Vest1x Dual-arm1x Sled1x Docking plate1x Battery plate1x WM701A monitor1x HDMI cable1x 12V cable1x Wireless follow focus1x locking bracket & 2 rodsDESCRIPTION:A Wireless Follow Focus...
- Standard layout:
- Load Capacity 1kg to 7kg
- 1x Load Vest
- 1x Dual-arm
- 1x Sled
- 1x Docking plate
- 1x Battery plate
- 1x WM701A monitor
- 1x HDMI cable
- 1x 12V cable
- 1x Wireless follow focus
- 1x locking bracket & 2 rods
A Wireless Follow Focus unit is a device that assists the camera operators in adjusting the focus or focal distance (zoom) of the camera shooting remotely. It is a great alternative to the conventional focusing systems, being suitable for various camcorders and DSLR cameras. The Wireless Follow Focus can be used along with matching camera control gear like DSLR rigs, sliders, Steadycam kits, cranes/ jibs / dolly, Easy Rigs etc.
The Wondland Wireless Follow Focus KIT (WF01) has a transmission range up to 300m in outdoor open area, without any wall blocking. The device functions on a wireless radio frequency, without the interference of ordinary frequency range.
The controller features 4 memory buttons to record different focusing points that can be used repeatedly and also can be randomly switched and combined willfully. The replay speed knob adjusts the moving speed between the focusing points in order to meet different shooting requirements. The infrared shutter button located in the center of the wireless controller replaces the camera shutter and provides remote shooting (or start/stop recording) of the subject from the desired distance. The focusing knob enables a smooth and accurate operation for high quality and valuable results.
Steadycam (stabilization system of video camera) came out in America in 1970s. With continuous development of years, Steadycam has been widely used in film, TV, sports, stage performance and wedding markets. Middle-end and professional users' demand to Steadycam also grows rapidly, which is necessary corollary equipment in film, video and other professional fields. With tool-free installing and adjusting, easy operation and excellent stability, Wondlan "Leopard" series Steadycam will make a storm at professional Steadycam market with its attractive appearance, superior materials, light weight and high intensity. Based on the older editions, Wondlan has developed new Leopard I and Ⅱ Steadycam, which feature wider bearing ranges and scalable carbon fiber posts; further, the Leopard Ⅱ is equipped with cables for power, HDMI and AV, to meet various shooting demands.
High-intensity and light-weight aerial aluminum alloy processed by CNC is used to make the main part of the arm. 26 high-quality precision bearing are installed at joints of the arm, to achieve simple adjusting and easy operating. Double-section and double-spring structure is adopted to support large scope of weight. Elasticity adjusting button can control the length of springs, to adjust the bearing. Thanks to its ultra-wide range of bearing, each section of the arm can be used to easily adjust the load of spring, which can bear a maximum of 7.5kg of equipment; Bore size of the plug of spring arm is 16mm, matching special stabilizer of Wondlan to achieve multiple-angle shooting.
Comfortable and air-permeable high-end composite materials and ergonomic design are adopted to bear the weight of Steadicam evenly from all positions; Heights of front chest plate and height adjusting plate of the vest can both be adjusted, and each fastening position can be adjusted freely, to bring wide scope of application; The vest can be put on and adjusted without any tool, making it simple and easy to use, so that workforce and time are saved and shooting efficiency is increased; Hasps of the vest are all made of special materials, which feature strong bearing capacity, and a tool kit is allocated on the back to make shooting easier.
Weight: 6,5 kg
Light-weight carbon fiber is used to make the main part of stabilizer, making hand-holding easy and comfortable; The carbon fiber main post is scalable in the scope of 550-950mm, increasing the power weight ratio; Proprietary “double-direction precision fine tuning head” of Wondlan is easy to install, and flexible to adjust all around;S pecial universal joint of Steadicam features high-precision and low-friction, allowing smoother shooting and more flexible operating; I-type straight bar can be rotated freely in all directions, both horizontally and vertically, to achieve all-round smooth shooting; Monitor bracket that can be adjusted in all directions is applicable in all kinds of environment, bringing clear and simple vision.
Weight: 1,5 kg
The Wondlan WM-701A HD screen is an ultra-thin HD monitor for use with DSLR cameras and video camcorders. The monitor supports 1080p High Definition Display output and a composite AV port so that the monitor can connect laptop or computer. The monitor is specially manufactured with high quality materials and designed for the most common DSLR cameras and video camcorders. The monitor displays the most realistic images. The HD HDMI connection makes it possible to directly connect the monitor to the HDMI signal from the camera. The HDMI signals supported include 480i, 480p, 576i, 720p and 1080p. The temperature can be adjusted by the user. Besides the presets 6500K, 7500K and 9300K color temperature can also be customized to be set. The Wondlan WM-701A features a full-screen viewfinder, and there are five preset box markings available. Through the show Trichromatic screen function (Check Field Mode) allows the user to split the image into the Red, Green, Blue, mono or color. By choosing one of these colors, one has a higher contrast image to focus. Other user-friendly features include: Screen Marker (80%, 85%, and 90, 93% and 96%), Center Marker, Image Flip Up (L / R and U / D), Brightness, Contrast Ratio, Hue and Saturation.
All Wondlan monitors come standard with an adapter cable. This adapter cable enables the monitor be powered via a V-Lock battery. Optionally there is a 12V - 1000mA power adapter available. There are also two optional adapter plates available which make it possible to feed the monitors through a Canon LPE-6 batteries or a Sony F970 battery. The optional power adapter and adapter plates can be found at the bottom of this page for relevant articles.