Yongnuo YN-560 IV for Canon/Nikon
- Brands Yongnuo
- Product Code: YN-560 IV
- Reward Points: 100
- Delievery Time: 2 To 3 Days
YONGNUO YN-560 IV Wrieless Speedlite Flash for Canon Nikon Camera
Wireless Transceiver Integrated - Fantastic with Three Controlling Groups
- Yongnuo 2.4GHz Speedlite YN560 IV.
YN-560 IV Flash Speedlite is a combination of YN-560 III and YN560-TX, it has built-in trigger system, so you can not only use it as flash speedlite, but also a flash controller Transmitter.
Supports Wireless Master Function
- The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III.
Supports Wireless Slave Function, fully supports YN560-TX?RF-603?I/II??RF-602 Wireless transmitter
- One YN560 IV can respectively receive the wireless signal from YN560 IV?YN560-TX?RF-603 (I/II)?RF-602,with optional 16 channels; when the YN560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings.
Multiple Trigger Synchronous Mode Supported
- The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode.
Settings Save Automatically, Supports Custom Settings (Fn)
- The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed.
GN58 @ ISO100?105mm
- High Guide Number 2.4G wireless speedlite, supports M/Multi/-- mode.
Sound Prompting System
- When the sound prompting system is enabled, the different sound ways will prompt different operating state of the flash so as to allow you focus on shooting.
Support Electric Zooming Function
- The flash coverage can be altered between 24~105mm through the [ZOOM] button.
Ultra fast Charging Recycle System, Supports External Power Supply
Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface
1) TX Master Flash Mode:
- When you set up YN-560IV as RX mode, you can use it with YN560-TX flash controller, and RF-602, RF-603 II, RF-605 single transceiver.
2) RX Slave Mode:
- When you set up YN-560IV as TX mode, it can be used as a flash controller transmitter, it can trigger YN-560 IV ( RX mode )and YN-560 III ( RX mode ), and also can be used with RF-602, RF-603 II, RF-605 together.
3) Manual mode
4) Multi mode
5) S1 / S2 mode --- You should use those two modes off camera
6) Power saving mode
7) Overheating Protection
8) Manually set and zooming position
9) PC Synchronous Port
- ALL Canon Nikon Pentax Olympus DSLR Camera
- Yongnuo RF-605, RF-603 II, RF-602, YN-622C, YN-622N, YN560-TX
- Yongnuo YN-560 III
- Yongnuo Flash Battery Pack SF-17 C / SF-18 C
1 x YN-560 IV Flash Speedlite
1 x Protecting bag
1 x Original box
1 x Manual in Chinese and English